PUBLICATIONS

Books / Book Chapters [10]

  • Cardoso, A. J. M. (Editor): Diagnosis and Fault Tolerance of Electrical Machines, Power Electronics and Drives, IET - The Institution of Engineering and Technology (ISBN 978-1-78561-531-3), London, UK, 376 pp., 2018.

  • Cardoso, A. J. M.: "Introduction", in Diagnosis and Fault Tolerance of Electric Machines, Power Electronics and Drives, A. J. M. Cardoso (Editor), pp. 1-6, IET - The Institution of Engineering and Technology (978-1-78561-531-3), London, UK, 2018.

  • Estima, J. O.; Gyftakis, K. N.: "Voltage-Source Inverter-Fed Drives", in Diagnosis and Fault Tolerance of Electric Machines, Power Electronics and Drives, A. J. M. Cardoso (Editor), pp. 7-75, IET - The Institution of Engineering and Technology (978-1-78561-531-3), London, UK, 2018.

  • Fonseca, D. S. B.; Gameiro, N. S.: "Switched Reluctance Machine Drives", in Diagnosis and Fault Tolerance of Electric Machines, Power Electronics and Drives, A. J. M. Cardoso (Editor), pp. 77-119, IET - The Institution of Engineering and Technology (978-1-78561-531-3), London, UK, 2018.

  • Tessarolo, A.; Alcaso, A. N.: "High-Power Synchronous Machine Drives", in Diagnosis and Fault Tolerance of Electric Machines, Power Electronics and Drives, A. J. M. Cardoso (Editor), pp. 121-194, IET - The Institution of Engineering and Technology (978-1-78561-531-3), London, UK, 2018.

  • Amaral, A. M. R.; Sahraoui, M.: "Capacitors", in Diagnosis and Fault Tolerance of Electric Machines, Power Electronics and Drives, A. J. M. Cardoso (Editor), pp. 195-286, IET - The Institution of Engineering and Technology (978-1-78561-531-3), London, UK, 2018.

  • Bento, F. J. F.; Ribeiro, E. F. F.: "DC-DC Converters", in Diagnosis and Fault Tolerance of Electric Machines, Power Electronics and Drives, A. J. M. Cardoso (Editor), pp. 287-348, IET - The Institution of Engineering and Technology (978-1-78561-531-3), London, UK, 2018.

  • Kerbouche, K.; Cardoso, A. J. M.; Yahia, K.; Mellit, A.: "Mathematical Modelling and Simulation of a Directly Coupled Water Pumping System, Using a Photovoltaic-Fed Synchronous Reluctance Motor", in Lecture Notes in Electrical Engineering, B. Hajji, G. M. Tina, K. Ghoumid, A. Rabhi and A. (Editors), Vol. 519, pp. 431-437, Springer Nature (ISBN 978-981-13-1404-9), Singapore, 2019.

  • Mazzoni, F. M.; Barcelos, A. S.; Cardoso, A. J. M.: "A Manutenção Preditiva na Análise de Avarias em Rolamentos, Utilizando Algoritmos de Inteligência Artificial"; Coleção Desafios das Engenharias: Engenharia Elétrica, Lilian Coelho de Freitas (Organizadora), Cap. 1, pp. 1-14, Atena Editora (ISBN 978-65-5983-260-6), Ponta Grossa, Paraná, Brasil, 2021.

  • Mazzoni, F. M.; Barcelos, A. S.: "Monitoramento da Produção Enxuta com Inteligência Artificial"; Avanços dos Estudos Científicos na Área Das Ciências Exatas, Edilson Antonio Catapan (Organizador), Vol. 1, Cap. 11, pp. 144-166, Brazilian Journals Editora (ISBN 978-65-81028-25-1), São José dos Pinhais, Paraná, Brasil, 2022.


International Journals [51]

  • Bento, F. J. F.; Cardoso, A. J. M.: "A Comprehensive Survey on Fault Diagnosis and Fault Tolerance of DC-DC Converters"; Chinese Journal of Electrical Engineering, Vol. 4, No. 3, pp. 1-12, September, 2018.

  • Laadjal, K.; Sahraoui, M.; Cardoso, A. J. M.; Amaral, A. M. R.: "Online Estimation of Aluminum Electrolytic-Capacitors Parameters Using a Modified Prony's Method"; IEEE Transactions on Industry Applications, Vol. 54, No. 5, pp. 4764-4774, September/October, 2018.

  • Silva, L. H. S.; Sguarezi Filho, A. J.; Fernandes, D. A.; Costa, F. F.; Cardoso, A. J. M.: "A Robust Phase-Locked Loop Against Fundamental Frequency Deviations and Harmonic Distortions"; Electric Power Systems Research, Vol. 163, Part A, pp. 338-347, October, 2018.

  • Adouni, A.; Cardoso, A. J. M.: "Thermal Analysis of Synchronous Reluctance Machines – A Review"; Electric Power Components and Systems, Vol. 47, No. 6/7, pp. 471-485, July, 2019.

  • Bento, F. J. F.; Cardoso, A. J. M.: "Open-Circuit Fault Diagnosis and Fault Tolerant Operation of Interleaved DC-DC Boost Converters for Homes and Offices"; IEEE Transactions on Industry Applications, Vol. 55, No. 5, pp. 4855-4864, September/October, 2019.

  • Jlassi, I.; Cardoso, A. J. M.: "Fault-Tolerant Back-to-Back Converter for Direct-Drive PMSG Wind Turbines using Direct Torque and Power Control Techniques"; IEEE Transactions on Power Electronics, Vol. 34, No. 11, pp. 11215-11227, November, 2019.

  • El Khil, S. K; Jlassi, I.; Cardoso, A. J. M., Estima, J. O.; Bellaaj, N. M.: "Diagnosis of Open-Switch and Current Sensor Faults in PMSM Drives Through Stator Current Analysis"; IEEE Transactions on Industry Applications, Vol. 55, Nº 6, pp. 5925-5937, November/December, 2019.

  • Santiago, F.; Bento, F. J. F.; Cardoso, A. J. M.; Gyftakis, K. N.: "Thermal Analysis of a Directly Grid-Fed Induction Machine with Floating Neutral Point, Operating under Unbalanced Voltage Conditions"; Electric Power Components and Systems, Vol. 47, Nº 11-12, pp. 1060-1076, November/December, 2019.

  • Hammoudi, M. Y.; Saadi, R.; Cardoso, A. J. M.; Benbouzid, M. E. H.; Sahraoui, M.: "Practical Implementation of H-Infinity Control for Fuel Cell-Interleaved Boost Converter"; International Journal of Modelling and Simulation, Vol. 40, Nº 1, pp. 44-61, January, 2020.

  • Sabouri, M.; Ojaghi, M.; Faiz, J.; Cardoso, A. J. M.: "Model-based Unified Technique for Identifying Severities of Stator Inter-turn and Rotor Broken Bar Faults in Squirrel Cage Induction Motors"; IET Electric Power Applications, Vol. 14, Nº 2, pp. 204-211, February, 2020.

  • Fonseca, D. S. B.; Santos, C. M. S.; Cardoso, A. J. M.: "Stator Faults Modelling and Diagnostics of Line-Start Permanent Magnet Synchronous Motors"; IEEE Transactions on Industry Applications, Vol. 56, Nº 3, pp. 2590-2599, May-June, 2020.

  • Ramos, C. A. F.; Alcaso, A. N.; Cardoso, A. J. M.: "Análise por Termografia de Módulos Termofotovoltaicos"; TMQ – Techniques, Methodologies and Quality, Special Issue on Sustainability and Renewable Energy, pp. 177-192, June, 2020.

  • Cardoso, A. J. M.: "Power Electronics Design Methods and Automation in the Digital Era"; IEEE Power Electronics Magazine, Vol. 7, Nº 2, pp.36-40, June, 2020.

  • Bento, F. J. F.; Cardoso, A. J. M.: "Fault-Tolerant LED Lighting Systems Featuring Minimal Loss of Luminous Flux"; IEEE Transactions on Industry Applications, Vol. 56, Nº 4, pp. 4309-4318, July-August, 2020.

  • Mateus, B.; Farinha, J. T.; Cardoso, A. J. M.: "Production Optimization versus Asset Availability - A Review"; WSEAS Transactions on Systems and Control, Vol. 15, Art. #33, pp. 320-332, August, 2020.

  • Jlassi, I.; Cardoso, A. J. M.: "A Single Method for Multiple IGBTs, Current-and Speed-Sensor Faults Diagnosis in Regenerative PMSM Drives"; IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 8, Nº 3, pp. 2583-2599, September, 2020.

  • Martins, A. B.; Farinha, J. T.; Cardoso, A. J. M.: "Calibration and Certification of Industrial Sensors - A Global Review"; WSEAS Transactions on Systems and Control, Vol. 15, Art. #41, pp. 394-416, September, 2020.

  • Pais, E.; Farinha, J. T.; Cardoso, A. J. M.; Raposo, H.: "Optimizing the Life Cycle of Physical Assets - A Review"; WSEAS Transactions on Systems and Control, Vol. 15, Art.#42, pp. 417-430, September, 2020.

  • Moscatiello, C.; Boccaletti, C.; Alcaso, A. N.; Ramos, C. A. F.; Cardoso, A. J. M.: "Trigeneration System Driven by the Geothermal and Solar Sources"; IET Renewable Power Generation, Vol. 14, Nº 13, pp. 2340-2347, October, 2020.

  • Bento, F. J. F.; Adouni, A.; Muxiri, A. C. P.; Fonseca, D. S. B.; Cardoso, A. J. M.: "On the Risk of Failure to Prevent Induction Motors Permanent Damage, Due to the Short Available Time-to-Diagnosis of Inter-Turn Short-Circuit Faults"; IET Electric Power Applications, Vol. 15, Nº 1, pp. 51-62, January, 2021.

  • Adouni, A.; Cardoso, A. J. M.: "Thermal Analysis of Low-Power Three-Phase Induction Motors Operating under Voltage Unbalance and Inter-Turn Short Circuit Faults"; Machines, Vol. 9, No. 1, pp. 1-11, January, 2021.

  • Rodrigues, J. A.; Farinha, J. T.; Cardoso, A. J. M.: "Predictive Maintenance Tools - A Global Survey"; WSEAS Transactions on Systems and Control, Vol. 16, Art #7, pp. 96-109, January, 2021.

  • Barcelos, A. S.; Mazzoni, F. M.; Cardoso, A. J. M.: "Bearing Failure Analysis Using Artificial Intelligence Algorithms"; Brazilian Journal of Development, Vol. 7, Nº 3, pp. 29080-29093, March, 2021.

  • Azzoug, Y.; Sahraoui, M.; Pusca, R.; Ameid, T.; Romary, R.; Cardoso, A. J. M.: "High-Performance Vector Control without AC Phase Current Sensors for Induction Motor Drives: Simulation and Real-Time Implementation"; ISA Transactions, Issue 2, Vol. 109, pp. 295-306, March, 2021.

  • Ghahfarokhi, P. S.; Podgornovs, A.; Kallaste, A.; Cardoso, A. J. M.; Belahcen, A.; Vaimann, T.; Tiismus, H.; Asad, B.: "Opportunities and Challenges of Utilizing Additive Manufacturing Approaches in Thermal Management of Electrical Machines"; IEEE Access, Vol. 9, pp. 36368-36381, March, 2021.

  • Azzoug, Y.; Sahraoui, M.; Pusca, R.; Ameid, T.; Romary, R.; Cardoso, A. J. M.: "Current Sensors Fault Detection and Tolerant Control Strategy for Three-Phase Induction Motor Drives"; Electrical Engineering, Vol. 103, Nº 2, pp. 881-898, April, 2021.

  • Gyftakis, K. N.; Cardoso, A. J. M.: "Reliable Detection of Stator Interturn Faults of Very Low Severity Level in Induction Motors"; IEEE Transactions on Industrial Electronics, Vol. 68, Nº 4, pp. 3475-3484, April, 2021.

  • Barcelos, A. S.; Cardoso, A. J. M.: "Current-Based Bearing Fault Diagnosis Using Deep Learning Algorithms"; Energies, Vol. 14, Nº 9, 14 pp., May, 2021.

  • Gmati, B.; Jlassi, I.; El Khil, S. K; Cardoso, A. J. M.: "Open-Switch Fault Diagnosis in Voltage Source Inverters of PMSM Drives Using Predictive Current Errors and Fuzzy Logic Approach"; IET Power Electronics, Vol. 14, Nº 6, pp. 1059-1072, May, 2021.

  • Bento, F. J. F.; Cardoso, A. J. M.: "Comprehensive Survey and Critical Evaluation of the Performance of State-of-the-Art LED Drivers for Lighting Systems"; Chinese Journal of Electrical Engineering, Vol. 7, Nº 2, pp. 21-36, June, 2021.

  • Ghahfarokhi, P. S.; Podgornovs, A.; Kallaste, A.; Cardoso, A. J. M.; Belahcen, A.; Vaimann, T.; Asad, B.; Tiismus, H.: "Determination of Heat Transfer Coefficient from Housing Surface of a Totally Enclosed Fan-Cooled Machine during Passive Cooling"; Machines, Vol. 9, Nº 6, 12 pp., June, 2021.

  • Laadjal, K.; Sahraoui, M.; Cardoso, A. J. M.: "On-Line Fault Diagnosis of DC-Link Electrolytic Capacitors in Boost Converters Using the STFT Technique"; IEEE Transactions on Power Electronics, Vol. 36, Nº 6, pp. 6303-6312, June, 2021.

  • Mesai-Ahmed, H.; Bentaallah, A.; Cardoso, A. J. M.; Djeriri, Y.; Jlassi, I.: "Robust Neural Control of the Dual Star Induction Generator Used in a Grid-Connected Wind Energy Conversion System"; Mathematical Modelling of Engineering Problems, Vol. 8; Nº 3, pp. 323-332, June, 2021.

  • Ambrožič, V.; Cardoso, A. J. M.; Rigatos, G.: "Advances in Fault Diagnostics and Post-Fault Operation of Electrical Drives"; IET Electric Power Applications, Vol. 15, Nº 7, pp. 795-798, July, 2021.

  • Mateus, C. B.; Mendes, M.; Farinha, J. T.; Cardoso, A. J. M.: "Anticipating Future Behavior of an Industrial Press Using LSTM Networks"; Applied Sciences, Vol. 11, Nº 13, 16 pp., July, 2021.

  • Laadjal, K.; Cardoso, A. J. M.: "Estimation of Lithium-Ion Batteries State-Condition in Electric Vehicle Applications: Issues and State of the Art"; Electronics, Vol. 10, Nº 13, 36 pp., July, 2021.

  • Jlassi, I.; Cardoso, A. J. M.: "Open-Circuit Fault-Tolerant Operation of Permanent Magnet Synchronous Generator Drives for Wind Turbine Systems using a Computationally Efficient Model Predictive Current Control"; IET Electric Power Applications, Vol. 15, Nº 7, pp. 837-846, July, 2021.

  • Jlassi, I.; Cardoso, A. J. M.: "Enhanced and Computationally Efficient Model Predictive Flux and Power Control of PMSG Drives for Wind Turbine Applications"; IEEE Transactions on Industrial Electronics, Vol. 68, Nº 8, pp. 6574-6583, August, 2021.

  • Martins, A.; Fonseca, I.; Farinha, J. T.; Reis, J.; Cardoso, A. J. M.: "Maintenance Prediction Through Sensing Using Hidden Markov Models – A Case Study"; Applied Sciences, Vol. 11, Issue 16, #7685, 20 pp., August, 2021.

  • Laadjal, K.; Sahraoui, M.; Alloui, A.; Cardoso, A. J. M.: "Three-Phase Induction Motors Online Protection Against Unbalanced Supply Voltages"; Machines, Vol. 9, Issue 9, #203, 13 pp., September, 2021.

  • Laadjal, K.; Cardoso, A. J. M.: "A Review of Supercapacitors Modeling, SoH, and SoE Estimation Methods: Issues and Challenges"; International Journal of Energy Research, Vol. 45, Issue 13, pp. 18424-18440, October, 2021.

  • Pais, J. E. A.; Raposo, H. D. N.; Farinha, J. T.; Cardoso, A. J. M.; Marques, P. A.: "Optimizing the Life Cycle of Physical Assets through an Integrated Life Cycle Assessment Method"; Energies, Vol. 14, Issue 19, # 6128, 24 pp., October, 2021.

  • Mateus, B. C.; Mendes, M.; Farinha, J. T.; Assis, R.; Cardoso, A. J. M.: "Comparing LSTM and GRU Models to Predict the Condition of a Pulp Paper Press"; Energies, Vol. 14, Issue 21, # 6958, 21 pp., November, 2021.

  • Freire, N. M. A.; Cardoso, A. J. M.: "Fault Detection and Condition Monitoring of PMSGs in Offshore Wind Turbines"; Machines, Vol. 9, Issue 11, #260, 26 pp., November, 2021.

  • Serra, J.; Jlassi, I.; Cardoso, A. J. M.: "A Computationally Efficient Model Predictive Control of Six-Phase Induction Machines Based on Deadbeat Control"; Machines, Vol. 9, Issue 12, #306, 17 pp., December, 2021.

  • Azzoug, Y.; Pusca, R.; Sahraoui, M.; Ammar, A.; Ameid, T.; Romary, R.; Cardoso, A. J. M.: "An Active Fault-Tolerant Control Strategy for Current Sensors Failure for Induction Motor Drives Using a Single Observer for Currents Estimation and Axes Transformation"; European Journal of Electrical Engineering, Vol. 23, Nº 6, pp. 467-474, December, 2021.

  • Rodrigues, J. A.; Farinha, J. T.; Mendes, M.; Mateus, R.; Cardoso, A. J. M.: "Short and Long Forecast to Implement Predictive Maintenance in a Pulp Industry"; Eksploatacja i Niezawodnosc – Maintenance and Reliability, Vol. 24, Issue 1, pp. 33-41, January, 2022.

  • Barcelos, A.; Mazzoni, F. M.; Cardoso, A. J. M.: "Bearing Damage Analysis with Artificial Intelligence Algorithms – A New Feature Extraction Approach for Current-Based Signals"; Journal of Control, Automation and Electrical Systems, Vol. 33, Issue 1, pp. 282-292, February, 2022.

  • Benjamim, W.; Jlassi, I.; Cardoso, A. J. M.: "A Computationally Efficient Model Predictive Current Control of Synchronous Reluctance Motors Based on Hysteresis Comparators"; Electronics, Vol. 11, Nº 3, #379, pp. 1-14, February, 2022.

  • Mesai-Ahmed, H.; Jlassi, I.; Cardoso, A. J. M.; Bentaallah, A.: "Multiple Open-Circuit Faults Diagnosis in Six-Phase Induction Motor Drives Using Stator Current Analysis"; IEEE Transactions on Power Electronics, Vol. 37, Nº 6, pp. 7275-7285, June, 2022.

  • Mahmoudi, A.; Jlassi, I.; Cardoso, A. J. M.; Yahia, K.; Sharoui, M.: "Inter-Turn Short-Circuit Faults Diagnosis in Synchronous Reluctance Machines, Using the Luenberger State Observer and Current's Second-Order Harmonic"; IEEE Transactions on Industrial Electronics, Vol. 69, Nº 8, pp. 8420-8429, August, 2022.


International Conferences [50]

  • Goh, S. Y.; Fawzal, A. S.; Gyftakis, K. N.; Cardoso, A. J. M.: "Impact of the Fan Design and Rotational Direction on the Thermal Characteristics of Induction Motors"; Proceedings of the 23rd International Conference on Electrical Machines, Alexandroupoli, Greece, pp. 1227-1233, September 3-6, 2018.

  • Jlassi, I.; Cardoso, A. J. M.: "Model Predictive Current Control of Synchronous Reluctance Motors, Including Saturation and Iron Losses"; Proceedings of the 23rd International Conference on Electrical Machines, Alexandroupoli, Greece, pp. 1598-1603, September 3-6, 2018.

  • Fonseca, D. S. B.; Santos, C. M. C.; Cardoso, A. J. M.: "On-Line Stator Fault Diagnosis in Line-Start Permanent Magnet Synchronous Motors"; Proceedings of the 23rd International Conference on Electrical Machines, Alexandroupoli, Greece, pp. 1925-1931, September 3-6, 2018.

  • Jlassi, I.; Bento, F. J. F.; Cardoso, A. J. M.: "Fault-Tolerant PMSG Direct-Drive Wind Turbines, using Vector Control Techniques with Reduced DC-Link Ratings"; Annual Conference of the IEEE Industrial Electronics Society, Washington, USA, pp. 1214-1219, October, 2018.

  • Arroussi, M. F.; Arif. A.; Guettaf, A.; Cardoso, A. J. M.; Saadi, R.: "Improvement of the Maximum Power Point Tracker for Photovoltaic Generators with Particle Swarm Optimization and Fuzzy-Sliding Mode Techniques under Partial Shading Condition; Proceedings of the 6th International Conference on Emerging and Renewable Energy: Generation and Automation, Sousse, Tunisia, 7 pp., October 28-30, 2018.

  • Abouobaida, H.; Cardoso, A. J. M.: "Fault-Tolerant Control Strategy for DC-DC Converter in Power Wind Conversion Systems"; 1st International Conference on Electronics, Control, Optimization and Computer Science, Kenitra, Morocco, 6 pp., December, 2018.

  • Mahmoudi, A.; Yahia, K.; Cardoso, A. J. M.; Sahraoui, M.; Mesai Ahmed, H.: "Modeling of Synchronous Reluctance Generator for an Isolated Wind Turbine System"; Proceedings of the International Symposium on Technology & Sustainable Industry Development, El Oued, Algeria, 4 pp., February 24-26, 2019.

  • Muxiri, A. C. P.; Bento, F. J. F.; Fonseca, D. S. B.; Cardoso, A. J. M.: "Thermal Analysis of an Induction Motor Subjected to Inter-Turn Short-Circuit Failures in the Stator Windings"; International Conference on Industrial Engineering, Applications and Manufacturing, 5 pp., Sochi, Russian Federation, 25-29 March 2019.

  • Fonseca, D. S. B.; Cardoso, A. J. M.: "On-Line Inter-Turn Short-Circuit Fault Diagnosis in Switched Reluctance Motors"; Proceedings of the IEEE International Electric Machines and Drives Conference, San Diego, California, USA, pp. 198-202, May 12-15, 2019.

  • Bento, F. J. F.; Cardoso, A. J. M.: "Novel Fault Tolerant DC-DC Converter Architecture for LED Lighting Systems Operating in DC Microgrids"; Proceedings of the 3rd IEEE International Conference on DC Microgrids, Matsue, Japan, 6 pp., May 20-23, 2019.

  • Ramos, C. A. F.; Alcaso, A. N.; Cardoso, A. J. M.: "Photovoltaic-Thermal (PVT) Technology: Review and Case Study"; Proceedings of the 4th International Conference on New Energy and Future Energy Systems, Macau, 12 pp., July 21-24, 2019; IOP Conference Series: Earth and Environmental Science, Vol. 354: 012048, October 2019.

  • Bouchareb, I.; Lebaroud, A.; Cardoso, A. J. M.; Lee, S. B.: "Towards Advanced Diagnosis Recognition for Eccentricities Faults: Application on IM"; Proceedings of the IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Toulouse, France, pp. 271-282, August 27-30, 2019.

  • Guedidi, A.; Guettaf, A.; Cardoso, A. J. M.; Laala, W.: "Bearing Faults Classification Based on Variational Mode Decomposition and Artificial Neural Network"; Proceedings of the IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Toulouse, France, pp. 391-397, August 27-30, 2019.

  • Azzoug, Y.; Pusca, R.; Sahraoui, M.; Ammar, A.; Romary, R.; Cardoso, A. J. M.: "A Single Observer for Currents Estimation in Sensor’s Fault-Tolerant Control of Induction Motor Drives"; Proceedings of the 3rd International Conference on Applied Automation and Industrial Diagnostics, Elazig, Turkey, 6 pp., September 25-27, 2019.

  • Bento, F. J. F.; Cardoso, A. J. M.: "Fault-Tolerant LED Lighting Systems Featuring Minimal Loss of Luminous Flux"; Proceedings of the IEEE Energy Conversion Congress and Exposition, Baltimore, Maryland, USA, pp. 853-859, September 29 - October 3, 2019.

  • Jlassi, I.; Cardoso, A. J. M.: "Lookup-Table-Based Model Predictive Torque Control Without Weighting Factors for PMSM Drives"; 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, pp. 1165-1170, October 14-17, 2019.

  • Gyftakis, K. N.; Cardoso, A. J. M.: "Reliable Detection of Very Low Severity Level Stator Inter-Turn Faults in Induction Motors"; 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, pp. 1290-1295, October 14-17, 2019.

  • Adouni, A.; Cardoso, A. J. M.: "Thermal Transient Analysis of Asynchronous Machines Operating Under Supply Voltage Unbalance"; 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, pp. 1417-1422, October 14-17, 2019.

  • Laadjal, K.; Sahraoui, M.; Hammoudi, M. Y.; Cardoso, A. J. M.; Amaral, A. M. R.; Yahia, K.: "Diagnosis of Electrolytic Capacitors in Three-Phase Interleaved Boost Converters Controlled by Mixed Weighted Sensitivity H-Infinity Design Control"; 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, pp. 1678-1683, October 14-17, 2019.

  • Bento, F. J. F.; Cardoso, A. J. M.: "Sensorless Current Control of Large-Scale LED Lighting Systems based on SIMO LED Drivers"; 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, pp. 4280-4285, October 14-17, 2019.

  • André, P. C.; Adouni, A.; Cardoso, A. J. M.: "Induction Motor Thermal Analysis based on Lumped Parameter Thermal Network"; Proceedings of the International Congress on Engineering – Engineering for Evolution, Covilhã, Portugal, November 27-29, 2019.

  • Cardoso, A. J. M.; Popkov, E.; Koptjaev, E.: "Design of a Wind Turbines Synchronous Generator, with Longitudinal Excitation from Permanent Magnets"; 2020 International Conference on Industrial Engineering, Applications and Manufacturing, Sochi, Russia, pp. 1-6, May 18-22, 2020.

  • Azzoug, Y.; Sahraoui, M.; Pusca, R.; Ameid, T.; Romary, R.; Cardoso, A. J. M.: "A Variable Speed Control of Permanent Magnet Synchronous Motors Without Current Sensors"; IEEE 29th International Symposium on Industrial Electronics, Delft, The Netherlands, pp. 1485-1490, June 17-19, 2020.

  • Koptjaev, E.; Cardoso, A. J. M.; Popkov, E.: "Improving the Reliability of a Microprocessor-Controlled Electric Drive"; International Russian Automation Conference, Sochi, Russia, September 6-12, 2020.

  • Bento, F. J. F.; Cardoso, A. J. M.: "Performance Assessment of Two Alternative DC-DC Converter Topologies for EV Charging Applications"; 2020 Fifteenth International Conference on Ecological Vehicles and Renewable Energies, Monte-Carlo, Monaco, September 10-12, 2020.

  • Cardoso, A. J. M.; Popkov, E.; Koptjaev, E.: "Evolution and Development Prospects of Electric Propulsion Systems of Large Sea Ships"; International Ural Conference on Electrical Power Engineering, Chelyabinsk, Russia, pp. 296-303, September 22-24, 2020.

  • Ramos, C. A. F.; Alcaso, A. N.; Cardoso, A. J. M.: "Tecnologia Solar Híbrida"; XVII Congreso lberico y XIII Congreso lberoamericano de Energia Solar, Lisboa, Portugal, 9 pp., November 3-5, 2020.

  • Barcelos, A. S.; Mazzoni, F. M.; Cardoso, A. J. M.: "Análise de Avarias em Rolamentos utilizando Algoritmos da Inteligência Artificial"; XXIII Congresso Brasileiro de Automática, Brasil, 6 pp., November 23-26, 2020.

  • Abouobaida, H.; Abouelmahjoub, Y.; Cardoso, A. J. M.; Chikhy, H.; El Beid, S.: "Open-Circuit Fault Diagnosis and Fault-Tolerent Control Strategies for Interleaved Boost Converter"; IEEE 2nd International Conference on Electronics, Control, Optimization and Computer Science, Kenitra, Morocco, 6 pp., December 2-3, 2020.

  • Ghahfarokhi, P. S.; Podgornovs, A.; Kallaste, A.; Vaimann, T.; Belahcen, A.; Cardoso, A. J. M.: "Oil Spray Cooling with Hairpin Windings in High-Performance Electric Vehicle Motors"; 28th International Workshop on Electric Drives: Improving Reliability of Electric Drives, Moscow, Russia, 5 pp., January 27-29, 2021.

  • Amaral, A. M. R.; Cardoso, A. J. M.: "Regulated Step-Up Power Supplies: Design and Simulation"; 18th International Multi-Conference on Systems, Signals and Devices, Monastir, Tunisia, pp. 801-807, March 22-25, 2021.

  • Boussouar, M. E.; Yahia, K.; Cardoso, A. J. M.; Sahraoui, M.: "Comparative Study of Synchronous Reluctance Motor (SynRM) Control Strategies"; International Conference on Advances in Communication Technology, Computing and Engineering, Meknes, Morocco, 9 pp., March 24-26, 2021.

  • Dinis, J.; Cardoso, A. J. M.: "Wide Bandgap Semiconductor-Based Converters for EV and HEV Magnetically Coupled Resonant Wireless Power Transfer"; International Conference on Ecological Vehicles and Renewable Energies, Monte-Carlo, Monaco, 8 pp., May 5-7, 2021.

  • Antunes, H.; Fonseca, D. S. B.; Cardoso, A. J. M.: "Modeling of Symmetrical Six-Phase Induction Machines Under Stator Faults"; International Electric Machines and Drives Conference, Connecticut, USA, 7 pp., May 17-20, 2021.

  • Cardoso, A. J. M.; Koptjaev, E.: "Dynamic Modes of a Brushless Doubly-Fed Generator for Wind Turbines"; International Conference on Industrial Engineering, Applications and Manufacturing, Sochi, Russia, pp. 955-960, May 17-21, 2021.

  • Bento, F. J. F.; Cardoso, A. J. M.: "Highly Accurate Software-Based Current Compensating Strategy for Fault-Tolerant Large-Scale LED Lighting Systems"; IEEE Energy Conversion Congress and Exposition - Asia, Singapore, Singapore, pp. 2319-2323, May 24-27, 2021.

  • Laadjal, K.; Bento, F. J. F.; Jlassi, I.; Cardoso, A. J. M.: "Online Condition Monitoring of Electrolytic Capacitors in DC-DC Interleaved Boost Converters, Adopting a Model-Free Predictive Controller"; International Conference on Compatibility, Power Electronics and Power Engineering, 6 pp., Florence, Italy, July 14-16, 2021.

  • Amaral, A. M. R.; Cardoso, A. J. M.: "Design, Analysis and Simulation of AC-DC Converters with Python"; 3rd International Conference on Electronics Representation and Algorithm, Yogyakarta, Indonesia, pp. 13-18, July 29-30, 2021.

  • Barandier, P.; Cardoso, A. J. M.: "Asset Management and Energy Efficiency Improvements in a Critical Environment – The Case of a University Bioterium"; World Congress on Engineering Asset Management, Bonito, Brasil, 11 pp., August 15-18, 2021.

  • Bento, F. J. F.; Cardoso, A. J. M.: "Comparative Performance Evaluation of Two LED Driver Architectures for Residential Lighting Applications"; International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Dallas, Texas, pp. 216-220, August 22-25, 2021.

  • Laadjal, K.; Cardoso, A. J. M.: "Supercapacitors Online Parameters Estimation and State-of-Health Determination in Hybrid Energy Storage Systems"; International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Dallas, Texas, pp. 261-266, August 22-25, 2021.

  • Cardoso, A. J. M.; Koptjaev, E.: "The Impact of Current Distortions on the Measurement Accuracy of Insulation Control Systems for Galvanically Coupled Loads"; International Russian Automation Conference, Sochi, Russian Federation, pp. 698-707, September 5-11, 2021.

  • Bento, F. J. F.; Jlassi, I.; Cardoso, A. J. M.: "Model-Free Predictive Control of Interleaved DC-DC Converters, Based on Ultra-Local Model, with Constant Switching Frequency"; IEEE Energy Conversion Congress and Exposition, Vancouver, BC, Canada, pp. 2022-2028, October 10-14, 2021.

  • Ghahfarokhi, P. S.; Podgornovs, A.; Cardoso, A. J. M.; Kallaste, A.; Belahcen, A.; Vaimann, T.: "AC Losses Analysis Approaches for Electric Vehicle Motors with Hairpin Configuration"; 47th IEEE Annual Conference of the Industrial Electronics Society, Toronto, ON, Canada, 4 pp., October 13-16, 2021.

  • Dinis, J.; Bento, F. J. F.; Cardoso, A. J. M.: "A Single-Inductor Multiple Current Output RGB LED Driver Architecture with Hybrid Dimming for Large-Scale Facilities"; 47th IEEE Annual Conference of the Industrial Electronics Society, Toronto, ON, Canada, 6 pp., October 13-16, 2021.

  • Barcelos, A.; Mazzoni, F. M.; Cardoso, A. J. M.: "A New Approach for Bearing Condition Monitoring and Damage Detection Using Machine Learning Algorithms"; Simpósio Brasileiro de Automação Inteligente, Virtual Conference, pp. 201-208, October 17-20, 2021.

  • Rodrigues, J. A.; Farinha, J. T.; Cardoso, A. J. M.; Mendes, M.: "Prediction of Sensor Values in Paper Pulp Industry Using Neural Networks"; The Efficiency and Performance Engineering Network and the 6th International Conference on Maintenance Engineering, Tianjin, China, October 20-23, 2021.

  • Mateus, B.; Mendes, M.; Farinha, J. T.; Cardoso, A. J. M.: "Data Analysis for Predictive Maintenance Using Time Series and Deep Learning Models – A Case Study in a Pulp Paper Industry"; The Efficiency and Performance Engineering Network and the 6th International Conference on Maintenance Engineering, Tianjin, China, October 20-23, 2021.

  • Ghahfarokhi, P. S.; Podgornovs, A.; Cardoso, A. J. M.; Kallaste, A.; Belahcen, A.; Vaimann, T.: "Thermal Modeling of a TEFC Synchronous Reluctance Motor"; IEEE 62nd International Scientific Conference on Power and Electrical Engineering of Riga Technical University, Riga, Latvia, November 15-17, 2021.

  • Ghahfarokhi, P. S.; Podgornovs, A.; Cardoso, A. J. M.; Kallaste, A.; Belahcen, A.; Vaimann, T.: "Hairpin Windings Manufacturing, Design, and AC Losses Analysis Approaches for Electric Vehicle Motors"; Electric Drives Production Conference, Online Conference, pp. 1-7, December 7-9, 2021.


ORGANIZATION OF SEMINARS AND CONFERENCES [5]

  • Organisation of the High Level Conference entitled "DC Electricity Distribution", in the framework of Project TR@NSENER and Project Ef&RelDC@HomO, Guarda, Portugal, May 07, 2019.

  • Special Session on "Efficient and Reliable LED Lighting Systems", organized by A. J. M. Cardoso, Marco Dalla Costa and Fernando Bento for the 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, October 14-17, 2019.

  • Special Session on "Advanced Tools and Control Techniques for Diagnostics and Fault Tolerance in Multi-Phase Machines", organized by Mohamed G. M. Hussien, A. J. M. Cardoso, Essam E. M. Rashad for the 13th International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Dallas, Texas, USA, August 22-25, 2021.

  • Special Session on "Efficient and Sustainable LED Lighting Systems", organized by Fernando Bento, Pascal Dupuis and A. J. M. Cardoso for the 47th Annual Conference of the IEEE Industrial Electronics Society, Toronto, Canada, October 13-16, 2021.

  • Organisation of the "UNITA Workshop on Renewable Energies", in the framework of Project UNITA - Universitas Montium and Project Ef&RelDC@HomO, Covilhã, Portugal, October 27-28, 2021.


ADVANCED TRAINING

 PhD Theses [2]

  • Khaled Laadjal, "Fault Diagnosis of Electrolytic Capacitors for Machine Drive Applications", Supervisor: Mohamed Sahraoui, University of Biskra, Algeria, Co-supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, November, 2018.

  • Younes Azzoug, "Commande Tolérante aux Défauts d'un Entrainement Électrique à Courant Alternatif", Supervisor: Mohamed Sahraoui, University of Biskra, Algeria, Co-Supervisor: Raphael Romary, Artois University, France, January, 2021.

MSc Theses [19]

  • Ananias C. P. Muxiri, "Thermal Analysis of an Induction Motor Subjected to Short-Circuit Failures between Turns of the Stator Windings (in Portuguese)", Supervisor: A. J. Marques Cardoso, Co-Supervisor: Davide S. B. Fonseca, University of Beira Interior, Portugal, October, 2018.

  • Nacer-eddine Hamada, "Détection en Ligne de Défaults de Court-Circuit entre Spires Statoriques dans les Moteurs Asynchrones", Supervisor: Mohamed Sahraoui, University of Biskra, Algeria, July, 2019.

  • Sira Delfina Lage Valera, "Theoretical Study and Experimental Analysis of a Small–Scale Wind Power System for Developing Countries", Supervisor: Chiara Boccaletti, Sapienza University of Rome, Italy, Co-supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, October, 2019.

  • Pedro Cabral André, "Thermal Analysis of IM based on Multiphysics Approach", Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, Co-Supervisor: Amel Adouni, University of Beira Interior, Portugal, March, 2020.

  • Vladmir Sanches da Costa Tavares, "Impacto da Produção Renovável no Sistema Eléctrico de Energia da Ilha de Santiago (Cabo Verde)", Supervisor: Luís Oliveira, University of Algarve, Portugal. May, 2020.

  • João Paulo Marcelino Dinis, "Performance Evaluation of DC-DC Converters Based on Last-Generation Power Semiconductors, Applied to LED Lighting Systems”, Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, July, 2020.

  • Aymane Saad, "Etude Comparative des Différents Indicateurs du Défaut de Court-Circuit dans les MAS", Supervisor: Mohamed Sahraoui, University of Biskra, Algeria, September, 2020.

  • Bachir Lounissi, "L’Utilisation de la Méthode de Prony pour la Détection des Défaut de Court-Circuit dans les MAS", Supervisor: Mohamed Sahraoui, University of Biskra, Algeria, September, 2020.

  • Ahmed Ghrieb, "Diagnostic des Défauts dans la Cage d’un MAS en Utilisant la Technique de Prony", Supervisor: Mohamed Sahraoui, University of Biskra, Algeria, September, 2020.

  • Hugo Rafael Pinto Antunes, "Analysis and Diagnosis of Stator Failures in Six-Phase Induction Motors, with Symmetrical Winding", Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, Co-Supervisor: Davide Fonseca, University of Beira Interior, Portugal, October, 2020.

  • Maria Teresa Marques Dolores Serpa, "Proteção de Sistemas de Armazenamento de Energia Eléctrica", Supervisor: Luís Oliveira, University of Algarve, Portugal, December, 2020.

  • Pedro Henrique Nunes Caldas Wermelinger Barandier, "O Controlo da Qualidade e Manutenção na Gestão Energética Associada à Redução de Custos Mediante a Implementação de Princípios Lean e Ferramentas de Qualidade", Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, April, 2021.

  • Wagner Ruben Gaspar Benjamim, "An Advanced Model Predictive Current Control of Synchronous Reluctance Motors", Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, Co-Supervisor: Imed Jlassi, University of Beira Interior, Portugal, October, 2021.

  • Ana Rafaela Figueiredo Bento, "Analysis and Development of Protection Devices Applied to DC Microgrids" (in Portuguese), Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, November, 2021.

  • Carlos Fernando Ferreira Mosquera Fernandez, "Implementation of Machine Learning Techniques to the Diagnostic of Inter-Turn Short-Circuit Faults in the Stator Windings of Three-Phase Induction Motors" (in Portuguese), Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, November, 2021.

  • João Pedro Caetano Serra, "Development and Implementation of an Advanced Model Predictive Control for Asymmetrical Six-Phase Induction Motors" (in Portuguese), Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, Co-Supervisor: Imed Jlassi, University of Beira Interior, Portugal, November, 2021.

  • Kiesse Mangaka António, "Development and Implementation of Protection Systems Applied to DC Microgrids" (in Portuguese), Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, November, 2021.

  • Pedro Miguel Barata Andrade, "Analysis and Optimisation of a Proton-Exchange Membrane Fuel Cell" (in Portuguese), Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, Co-Supervisor: Adérito Alcaso, Polytechnic Institute of Guarda, Portugal, November, 2021.

  • Yolanda Vicente Sampaio, "Comparative Analysis of the Performance of DC-DC Converters Employed in EV Charging Applications" (in Portuguese), Supervisor: A. J. Marques Cardoso, University of Beira Interior, Portugal, November, 2021.

Internships [4]

  • Marco Manuel Matos Louro, "Professional Internship in Industrial Maintenance", Polytechnic of Guarda, Portugal, November 2018 - July 2019.

  • Meriem Dardouri, "Design of a Photovoltaic - Thermal (PV/T) Energy System for Residential Applications: Grid-connected and Standalone Operations Analysis, Power Energy Monitoring and Fault Tolerant Control", PhD Student, Ecole Nationale d'Ingénieurs de Tunis, Université de Tunis El Manar, Tunisia, May – July 2019.

  • Abdelkader Mahmoudi, "Performance Improvement of a Wind Turbine System Using a Synchronous Reluctance Machine", PhD Student, University of Biskra, Algeria, November 2019 - February 2021.

  • Hamza Mesai Ahmed, "Commande de Hautes Performances d’un Aérogénérateur Éolien à base d’une Machine Asynchrone à Double Étoile MADE via des Convertisseurs Multi-Niveaux", PhD Student, Université Djillali Liabes de Sidi Bel Abbès, Algeria, November 2019 - February 2021.


MODELS [2]

  • Online fault detection algorithm in the electrolytic capacitors using Prony's method (LabVIEW).

  • Online fault detection algorithm in the electrolytic capacitors using the Short-time Fourier Transform (STFT) technique (LabVIEW).


PROTOTYPES [12]

  • Experimental prototype for the acquisition of temperature in a 3-phase IM.

  • Experimental prototype of a fault-tolerant PMSG drive.

  • Experimental prototype of a fault-tolerant single-input multiple-output (SIMO) LED driver.

  • Experimental prototype of a PMSM drive.

  • Experimental prototype of a SynRM drive.

  • Experimental prototype of an instrumented PV-T flat collector.

  • Experimental prototype of a GaN-based LED driver.

  • Six-phase induction motor with symmetrical stator windings, containing tapings for the implementation of inter-turn short-circuits and thermocouples for temperature sensing.

  • Six-phase induction motor with asymmetrical stator windings, containing tapings for the implementation of inter-turn short-circuits and thermocouples for temperature sensing.

  • Thermal analysis of SynRMs – Experimental prototype of a SynRM equipped with temperature sensors.

  • LED lighting system based on WBG devices – Experimental prototype of a GaN-based LED driver.

  • Hybrid DC Circuit Breaker – Experimental prototype of two distinctive hybrid DC circuit breaker configurations.