Imed Jlassi
Researcher
Imed Jlassi was born in Tunis, Tunisia, in 1984. He received the MSc and PhD degrees in electrical engineering from Laboratoire des Systèmes Electriques, Ecole Nationale d’Ingénieurs de Tunis, in 2011 and 2016 respectively. From 2011 to 2016, he was a Contractual Assistant with the Department of Electrical Engineering, Ecole Nationale d’Ingénieurs de Carthage. In January 2014, he joined CISE - Electromechatronic Systems Research Centre (http://www.cise.ubi.pt), University of Beira Interior, Covilhã, Portugal, where he has been a Post-Doctoral Researcher since 2016. His research interests include digital control of power electronics converters and electric machines, fault diagnosis, and fault-tolerant control of AC motor drives and wind turbine systems.
Mahmoudi, A.; Jlassi, I.; Cardoso, A. J. M.; Yahia, K.: "Model Free Predictive Current Control Based on a Grey Wolf Optimizer for Synchronous Reluctance Motors"; Electronics, Vol. 11, No. 24, pp. 1-17, December, 2022.
Mesai Ahmed, H.; Jlassi, I.; Cardoso, A. J. M.; Bentaallah, A.: "Model-Free Predictive Current Control of Synchronous Reluctance Motors Based on a Recurrent Neural Network"; IEEE Transactions on Industrial Electronics, Vol. 69, No. 11, pp. 10984-10992, November, 2022.
Mahmoudi, A.; Jlassi, I.; Cardoso, A. J. M.; Yahia, K.; Sahraoui, M.: "Inter-Turn Short-Circuit Faults Diagnosis in Synchronous Reluctance Machines, Using the Luenberger State Observer and Current’s Second-Order Harmonic"; IEEE Transactions on Industrial Electronics, Vol. 69, No. 8, pp. 8420-8429, August, 2022.
Mesai Ahmed, H.; Jlassi, I.; Cardoso, A. J. M.; Bentaallah, A.: "Multiple Open-Circuit Faults Diagnosis in Six-Phase Induction Motor Drives Using Stator Current Analysis"; IEEE Transactions on Power Electronics, Vol. 37, No. 6, pp. 7275-7285, June, 2022.
Benjamim, W.; Jlassi, I.; Cardoso, A. J. M.: "A Computationally Efficient Model Predictive Current Control of Synchronous Reluctance Motors Based on Hysteresis Comparators"; Electronics, Vol. 11, No. 3, pp. 1-14, February, 2022.
Serra, J.; Jlassi, I.; Cardoso, A. J. M.: "A Computationally Efficient Model Predictive Control of Six-Phase Induction Machines Based on Deadbeat Control"; Machines, Vol. 9, No. 12, pp. 1-17, December, 2021.
Jlassi, I.; Cardoso, A. J. M.: "Enhanced and Computationally Efficient Model Predictive Flux and Power Control of PMSG Drives for Wind Turbine Applications"; IEEE Transactions on Industrial Electronics, Vol. 68, No. 8, pp. 6574-6583, August, 2021.
Jlassi, I.; Cardoso, A. J. M.: "Open-Circuit Fault-Tolerant Operation of Permanent Magnet Synchronous Generator Drives for Wind Turbine Systems using a Computationally Efficient Model Predictive Current Control"; IET Electric Power Applications, Vol. 15, No. 7, pp. 837-846, July, 2021.
Mesai Ahmed, H.; Bentaallah, A.; Cardoso, A. J. M.; Djeriri, Y.; Jlassi, I.: "Robust neural control of the dual star induction generator used in a grid-connected wind energy conversion system"; Mathematical Modelling of Engineering Problems, Vol. 8, No. 3, pp. 323-332, June, 2021.
Gmati, B.; Jlassi, I.; El Khil, S. K.; Cardoso, A. J. M.: "Open-switch fault diagnosis in voltage source inverters of PMSM drives using predictive current errors and fuzzy logic approach"; IET Power Electronics, Vol. 14, No. 6, pp. 1059–1072, May, 2021.
Jlassi, I.; Cardoso, A. J. M.: "A Single Method for Multiple IGBTs, Current- and Speed-Sensor Faults Diagnosis in Regenerative PMSM Drives"; IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 8, No. 3, pp. 2583 - 2599, September, 2020.
El Khil, S. K.; Jlassi, I.; Cardoso, A. J. M.; Estima, J. O.; Bellaaj, N. M.: "Diagnosis of Open-Switch and Current Sensor Faults in PMSM Drives Through Stator Current Analysis"; IEEE Transactions on Industry Applications, Vol. 55, No. 6, pp. 5925 - 5937, November / December, 2019.
Jlassi, I.; Cardoso, A. J. M.: "Fault-Tolerant Back-to-Back Converter for Direct-Drive PMSG Wind Turbines using Direct Torque and Power Control Techniques"; IEEE Transactions on Power Electronics, Vol. 34, No. 11, pp. 11215-11227, November, 2019.
Jlassi, I.; Estima, J. O.; El Khil, S. K.; Bellaaj, N. M.; Cardoso, A. J. M.: "A Robust Observer-Based Method for IGBTs and Current Sensors Fault Diagnosis in Voltage-Source Inverters of PMSM Drives"; IEEE Transactions on Industry Applications, Vol. 53, No. 3, pp. 2894-2905, May / June, 2017.
El Khil, S. K.; Jlassi, I.; Estima, J. O.; Bellaaj, N. M.; Cardoso, A. J. M.: "Current Sensor Fault Detection and Isolation Method for PMSM Drives, Using Average Normalized Currents"; Electronics Letters, Vol. 52, No. 17, pp. 1434-1436, August, 2016.
Jlassi, I.; Estima, J. O.; El Khil, S. K.; Bellaaj, N. M.; Cardoso, A. J. M.: "Multiple Open-Circuit Faults Diagnosis in Back-to-Back Converters of PMSG Drives for Wind Turbine Systems"; IEEE Transactions on Power Electronics, Vol. 30, No. 5, pp. 2689-2702, May, 2015.
Jlassi, I.; El Khil, S. K.: "A MRAS-Luenberger Observer Based Fault Tolerant Control of PMSM Drive"; Journal of Electrical Systems, Vol. 10, No. 1, pp. 48-62, January, 2014.
Bento, F. J. F.; Jlassi, I.; Cardoso, A. J. M.: "Model-Free Predictive Control of Interleaved DC-DC Converters, Based on Ultra-Local Model, with Constant Switching Frequency"; IEEE Energy Conversion Congress and Exposition, Vancouver, BC, Canada, pp. 2022-2028, October, 2021.
Laadjal, K.; Bento, F. J. F.; Jlassi, I.; Cardoso, A. J. M.: "Online Condition Monitoring of Electrolytic Capacitors in DC-DC Interleaved Boost Converters, Adopting a Model-Free Predictive Controller"; IEEE International Conference on Compatibility, Power Electronics and Power Engineering, Florence, Italy, pp. 1-6, July, 2021.
Jlassi, I.; Cardoso, A. J. M.: "Lookup-Table-Based Model Predictive Torque Control Without Weighting Factors for PMSM Drives"; Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, pp. 1165-1170, October, 2019.
Jlassi, I.; Bento, F. J. F.; Cardoso, A. J. M.: "Fault-Tolerant PMSG Direct-Drive Wind Turbines, using Vector Control Techniques with Reduced DC-Link Ratings"; Annual Conference of the IEEE Industrial Electronics Society, Washington, USA, pp. 1214-1219, October, 2018.
Jlassi, I.; Cardoso, A. J. M.: "Model Predictive Current Control of Synchronous Reluctance Motors, Including Saturation and Iron Losses "; International Conference on Electrical Machines, Alexandroupoli, Greece, pp. 1598 -1603, September, 2018.
Jlassi, I.; Cardoso, A. J. M.: "IGBTs and Current Sensors Fault Diagnosis in Direct-Drive PMSG Wind Turbine Systems using Adaptive Thresholds"; Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, pp. 5072-5077, October / November, 2017.
El Khil, S. K.; Jlassi, I.; Estima, J. O.; Bellaaj, N. M.; Cardoso, A. J. M.: "Detection and Isolation of Open-Switch and Current Sensor Faults in PMSM Drives, Through Stator Current Analysis"; International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Tinos, Greece, pp. 373-379, August / September, 2017.
Jlassi, I.; Cardoso, A. J. M.: "A Single Fault Diagnostics Approach for Power Switches, Speed Sensors and Current Sensors in Regenerative PMSM Drives"; IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, Tinos, Greece, pp. 366-372, August / September, 2017.
Bourogaoui, M.; Jlassi, I.; Ben Attia Sethom, H.; El Khil, S. K.: "An Effective Encoder Fault Detection in PMSM Drives at Different Speed Ranges"; IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, Guarda, Portugal, pp. 90-96, September, 2015.
Jlassi, I.; El Khil, S. K.; Bellaaj, N. M.: "Power Switch and Current Sensor Fault-Tolerant Control of PMSG Drives for Wind Turbine Systems"; IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, Guarda, Portugal, pp. 401-407, September, 2015.
Benjamim, W., "An Advanced Model Predictive Current Control of Synchronous Reluctance Motors", Supervisor: Cardoso, A. J. M., Co-Supervisor: Jlassi, I., University of Beira Interior, Portugal, 2021.
Serra, J., "Development and Implementation of an Advanced Model Predictive Control for Asymmetrical Six-Phase Induction Motors (in Portuguese)", Supervisor: Cardoso, A. J. M., Co-Supervisor: Jlassi, I., University of Beira Interior, Portugal, 2021.
Jlassi, I., "Etude et Analyse d’un Système Éolien basé sur une Génératrice Synchrone à Aimant Permanent en vue de sa Continuité de Service", Co-Supervisor: El Khil, S. K., Ecole Nationale d’Ingénieurs de Tunis, Tunisia, 2016.