Carlos Manuel Pereira Cabrita
Carlos Cabrita was born in Lisbon, Portugal on July 2, 1951. He received the E. E. Diploma and the PhD on E. E. from the Technical University of Lisbon, Lisbon, Portugal, in 1976 and 1988, respectively. He was been with Technical University of Lisbon, from 1978 to 1996. He has been with the University of Beira Interior since 1997, where he is currently Full Professor in the Department of Electromechanical Engineering. His research interests are focused on electrical machines design and maintenance processes. He has published about 250 papers in technical journals and conference proceedings.

Pousinho, H. M. I.; Freire, P.; Esteves, J.; Mendes, V. M. F.; Cabrita, C. M. P.; Collares-Pereira, M.: ''Optimal Generation Scheduling of Wind-CSP Systems in Day-Ahead Electricity Markets''; Technological Innovation for Cloud-Based Engineering Systems, Luís M. Camarinha-Matos, Thais A. Baldissera, Giovanni Di Orio and Francisco Marques (Editor), , 285-295 pp., Springer Berlin Heidelberg (978-3-319-16765-7), Berlin, Germany, 2015.
Saraiva, S.; Melício, R.; Matias, J. C.O.; Cabrita, C. M. P.; Catalão, J. P. S.: ''Simulation and Experimental Results for a Photovoltaic System Formed by Monocrystaline Solar Modules''; Technological Innovation for Value Creation, Luís M. Camarinha-Matos, Ehsan Shahamatnia and Gonçalo Nunes (Editor), , 329-336 pp., Springer Berlin Heidelberg (978-3-642-28254-6), Berlin, Germany, 2012.
Santo, A. E.; Calado, M. R. A.; Cabrita, C. M. P.: ''Sliding Mode Position Controller for a Linear Switched Reluctance Actuator''; Sliding Mode Control, Andrzej Bartoszewicz (Editor), , 181-202 pp., Intech (978-953-307-162-6), Rijeka, Croatia, 2011.
Pousinho, H. M. I.; Esteves, J.; Mendes, V. M. F.; Collares-Pereira, M.; Cabrita, C. M. P.: ''Bilevel Approach to Wind-CSP Day-Ahead Scheduling with Spinning Reserve under Controllable Degree of Trust''; Renewable Energy Journal, Vol. 85, No. , pp. 917-927, January, 2016.
Calado, M. R. A.; Santo, A. E.; Salvado, J. A. C.; Cabrita, C. M. P.; Mariano, S. J. P. S. : ''Using Finite Element Method based Software to Teach Electrical Machines – the Linear Switched Reluctance Actuator''; Computer Applications in Engineering Education Journal, Vol. 23, No. 6, pp. 824-836, November, 2015.
Pousinho, H. M. I.; Silva, H.; Mendes, V. M. F.; Collares-Pereira, M.; Cabrita, C. M. P.: ''Self-Scheduling for Energy and Spinning Reserve of Wind/CSP Plants by a MILP Approach''; Energy, Vol. 78, No. , pp. 524-534, December, 2014.
Fonseca, D. S. B.; Pinto, N. M. F.; Cardoso, A. J. M.; Cabrita, C. M. P.: ''A New Approach for the Magnetic Characterization of Iron Core Materials – The Case of Switched Reluctance Motor''; International Review of Electrical Engineering, Vol. 7, No. 5, pp. 5425-5429, September / October, 2012.
Flores, P. T.; Matias, J. C.O.; Cabrita, C. M. P.; Mendes, V. M. F.: ''Renewable Energies Increase, Fossil Fuels Replacement and Nuclear Option Assessment in the Portuguese Energy Mix''; Renewable Energy & Power Quality Journal, Vol. , No. 10, pp. , April, 2012.
Saraiva, S.; Melício, R.; Matias, J. C.O.; Cabrita, C. M. P.; Catalão, J. P. S.: ''Modelling, Iterative Procedure and Simulation Results for a Monocrystalline Solar Cell''; Renewable Energy & Power Quality Journal, Vol. , No. 10, pp. , April, 2012.
Santo, A. E.; Calado, M. R. A.; Cabrita, C. M. P.: ''On the Influence of the Pole and Teeth Shapes on the Performance of Linear Switched Reluctance Actuator''; Compel: The International Journal for Computation and Mathematics in Electrical and Electronic Engin, Vol. 30, No. 2, pp. 412-430, March / April, 2011.
Santo, A. E.; Calado, M. R. A.; Cabrita, C. M. P.: ''Dynamic Simulation of Electromagnetic Actuators Based on the Co-Energy Map''; Applied Computational Electromagnetics Society Journal, Vol. 25, No. 12, pp. 1118-1128, December, 2010.
Santo, A. E.; Calado, M. R. A.; Cabrita, C. M. P.: ''Design and Evaluation of a Linear Switched Reluctance Actuator for Positioning Tasks''; Turkish Journal of Electrical Engineering & Computer Sciences, Vol. , No. 6, pp. 925-941, November, 2010.
Calado, M. R. A.; Mariano, S. J. P. S. ; Cabrita, C. M. P.: ''Optimised Design and Analysis of a New Linear Switched Reluctance Actuator''; International Review of Electrical Engineering, Vol. , No. 3, pp. 919-926, May / June, 2010.
Calado, M. R. A.; Cabrita, C. M. P.; Mariano, S. J. P. S. : ''Characterization of a New Linear Switched Reluctance Actuator''; Electrical Review, Vol. , No. 5, pp. 44-49, May, 2010.
Santo, A. E.; Calado, M. R. A.; Cabrita, C. M. P.: ''Static Simulation of a Linear Switched Reluctance Actuator with the Flux Tube Method''; Advances in Electrical and Computer Engineering, Vol. 10, No. 2, pp. 35-42, May, 2010.
Silva, C. M. I.; Cabrita, C. M. P.; Matias, J. C.O.: ''Proactive Reliability Maintenance: A Case Study Concerning Maintenance Service Costs''; Journal of Quality in Maintenance Engineering, Vol. 14, No. 4, pp. 343-355, October, 2008.
Fonseca, D. S. B.; Cabrita, C. M. P.; Calado, M. R. A.: ''A Prototype of a Linear Switched Reluctance Motor with a New Design Methodology''; WSEAS Transaction on Power Systems, Vol. 3, No. 3, pp. 95-102, March, 2008.
Santo, A. E.; Calado, M. R. A.; Cabrita, C. M. P.: ''Influence of Pole Shape in Linear Switched Reluctance Actuator Performance''; Journal of Electrical Engineering, Vol. 8, No. 2, pp. 153-156, January, 2008.
Fonseca, D. S. B.; Cabrita, C. M. P.; Calado, M. R. A.: ''A New Methodology for Dynamic Performance Simulation of a New Linear Switched Reluctance Motor based on Geometrical Dimensions''; WSEAS Transaction on Power Systems, Vol. 1, No. 7, pp. 1282-1287, April, 2006.
Cabrita, C. M. P.; Fonseca, D. S. B.; Calado, M. R. A.; Santo, A. E.: ''Design of the Commutator Series Motor Operating in Both Direct Current and Single-Phase Eletric Traction''; WSEAS Transaction on Power Systems, Vol. 1, No. 7, pp. 1273-1281, April, 2006.
Fonseca, D. S. B.; Cabrita, C. M. P.; Calado, M. R. A.: ''Some Design Aspects Concerning a New Single-Phase AC/DC PWM Converter for AC Traction Systems''; WSEAS Transaction on Circuits and Systems, Vol. 4, No. 9, pp. 1019-1027, May, 2005.
Cabrita, C. M. P.; Cardoso, A. J. M.: ''Conceitos e Definições de Falha e Avaria nas Normas Portuguesas de Manutenção NP EN 13306:2007 e NP EN 15341:2009 - 2ª Parte''; Manutenção, Vol. , No. 129, pp. 4-9, June, 2016.
Cabrita, C. M. P.; Cardoso, A. J. M.: ''Conceitos e Definições de Falha e Avaria nas Normas Portuguesas de Manutenção NP EN 13306:2007 e NP EN 15341:2009''; Elevare, Vol. , No. 7, pp. 8-20, June, 2016.
Cabrita, C. M. P.; Cardoso, A. J. M.: ''Conceitos e Definições de Falha e Avaria nas Normas Portuguesas de Manutenção NP EN 13306:2007 e NP EN 15341:2009 - 1ª Parte''; Anais da Engenharia e Tecnologia Electrotécnica, Vol. , No. 125, pp. 4-9, June, 2015.
Cabrita, C. M. P.; Matias, J. C.O.; Santos, F. B.; Fernandes, C. A.: ''Estados e Tempos de Manutenção de um Bem''; Manutenção, Vol. 1, No. 124, pp. 12-14, March, 2015.
Pousinho, H. M. I.; Mendes, V. M. F.; Collares-Pereira, M.; Cabrita, C. M. P.: ''Análise do Sistema Eletroprodutor Ibérico e a Integração de Centrais de Concentração Solar''; Ingenium, Vol. II Série, No. 145, pp. 78-83, January / February, 2015.
Pousinho, H. M. I.; Silva, H.; Mendes, V. M. F.; Collares-Pereira, M.; Cabrita, C. M. P.: ''Wind-CSP Short-Term Coordination by MILP Approach''; IET Renewable Power Generation Conference, Naples, Italy, pp. 6, September, 2014.
Cabrita, C. M. P.; Fonseca, D. S. B.: ''Tracção Eléctrica Parte 2 - Aplicação ao Material Circulante Motor da Linha da Beira Baixa''; International Conference on Engineering, Covilhã, Portugal, pp. 7, November, 2013.
Cabrita, C. M. P.; Cardoso, A. J. M.: ''Conceitos e Definições de Falha e Avaria nas Normas Portuguesas de Manutenção NP EN 13306:2007 e NP EN 15341:2009''; Congresso Ibero-Americano de Manutenção, Cascais, Portugal, pp. 1-20, November, 2013.
Saraiva, S.; Melício, R.; Matias, J. C.O.; Cabrita, C. M. P.; Catalão, J. P. S.: ''Simulation and Experimental Results for a Photovoltaic System Formed by Polycrystalline Solar Modules''; IEEE Mediterranean Electrotechnical Conference, Hammamet, Tunisia, pp. 806-809, March, 2012.
Flores, P. T.; Matias, J. C.O.; Cabrita, C. M. P.; Mendes, V. M. F.; Catalão, J. P. S.: ''Renewable energies increase, fossil fuels replacement and nuclear option assessment in the Portuguese energy mix''; International Conference on Renewable Energies and Power Quality, Santiago de Composte, Spain, pp. 4, March, 2012.
Fonseca, D. S. B.; Pinto, N. M. F.; Cardoso, A. J. M.; Cabrita, C. M. P.: ''A New Methodology for the Redesign of a Switched Reluctance Motor Winding''; International Conference on Power Electronics Machines and Drives, Bristol, UK, pp. 1-6, March, 2012.
Saraiva, S.; Melício, R.; Matias, J. C.O.; Cabrita, C. M. P.; Catalão, J. P. S.: ''Modelling, Iterative Procedure and Simulation Results for a Monocrystalline Solar Cell''; International Conference on Renewable Energies and Power Quality, Santiago de Composte, Spain, pp. 4, March, 2012.
Cabrita, C. M. P.; Fonseca, D. S. B.; Calado, M. R. A.; Santo, A. E.; Mariano, S. J. P. S. : ''Penetration of both Eletric and Magnetic Fields into Human Tissues. Part 1 – Eletric Field''; Portuguese-Spanish Conference on Electrical Engineering, Ponta Delgada, Portugal, pp. (No. 1765), June / July, 2011.
Cabrita, C. M. P.; Fonseca, D. S. B.; Calado, M. R. A.; Santo, A. E.; Mariano, S. J. P. S. : ''Penetration of both Eletric and Magnetic Fields into Human Tissues. Part 2 – Magnetic Field''; Portuguese-Spanish Conference on Electrical Engineering, Ponta Delgada, Portugal, pp. (No.1766), June / July, 2011.
Fonseca, D. S. B.; Cabrita, C. M. P.; Calado, M. R. A.: ''Theoretical and Experimental Forces for a New Linear Switched Reluctance Traction Motor''; International Conference on Electrical Machines, Vilamoura, Portugal, pp. 1979-1983, September, 2008.
Santo, A. E.; Calado, M. R. A.; Cabrita, C. M. P.: ''Analysis and Position Control of a Linear Switched Reluctance Actuator Based on Sliding Mode Control''; International Power Electronics and Motion Control Conference, Poznań, Poland, pp. 1646-1651, September, 2008.
Fonseca, D. S. B.; Godinho, T. J. B.; Cabrita, C. M. P.: ''Electromagnetic Characterization of a Linear Reluctance Actuator. A New Approach''; International Conference on Electrical Machines, Vilamoura, Portugal, pp. 2201-2206, September, 2008.
Santo, A. E.; Calado, M. R. A.; Cabrita, C. M. P.: ''Linear Switched Reluctance Actuator Modelling with Flux Tubes considering Saturation Effects''; International Conference on Electrical Machines, Vilamoura, Portugal, pp. 1-6, September, 2008.
Matias, J. C.O.; Cabrita, C. M. P.: ''Lean Sigma, Life Cycle Assessment and Maintenance Function: An Introductory Approach''; International Congress on Condition Monitoring and Diagnostic Engineering Management, Prague, Czech Republic, pp. 331-344, June, 2008.
Santo, A. E.; Calado, M. R. A.; Cabrita, C. M. P.: ''Sliding Mode Position Control of a Linear Switched Reluctance Actuator''; European DSP Education and Research Symposium, Tel Aviv, Israel, pp. , June, 2008.
Fonseca, D. S. B.; Cabrita, C. M. P.; Calado, M. R. A.: ''Thermal Modeling and Characterization of Eletrical Machines, and Calculation of Current Ratings''; IET International Conference on Power Electronics, Machines and Drives, York, UK, pp. 475-479, April, 2008.
Fonseca, D. S. B.; Cabrita, C. M. P.: ''A Preliminary Study on the Application of the Spatial Complex Transform for Fault Detection in a Four Phase Linear Switched Reluctance Motor''; International Congress on Condition Monitoring and Diagnostic Engineering Management, Faro, Portugal, pp. 65-74, June, 2007.
Fonseca, D. S. B.; Cabrita, C. M. P.; Calado, M. R. A.: ''A Control Characterization of a New Linear Switched Reluctance Motor''; International Conference on Power Electronics Machines and Drives, Antalya, Turkey, pp. 548-553, March, 2007.
Fonseca, D. S. B.; Cabrita, C. M. P.; Calado, M. R. A.: ''A New and Fast Design Methodology for a New Linear Switched Reluctance Motor taking Performance Evaluation and Path Arrangements into account''; International Conference on Electrical Machines, Chania, Crete Island, Greece, pp. (No. 208), May, 2006.
Fonseca, D. S. B.; Cabrita, C. M. P.; Calado, M. R. A.: ''Some Design Aspects Concerning a New Three-Phase AC/DC PWM Converter for Four Quadrant Performance''; IET International Conference on Power Electronics, Machines and Drives, Dublin, Ireland, pp. 591-595, February / March, 2006.
Fonseca, D. S. B.; Cabrita, C. M. P.; Calado, M. R. A.: ''Linear Switched Reluctance Motor. A new Design Methodology Based on Performance Evaluation''; International Conference on Power Electronics Machines and Drives, Hammamet, Tunisia, pp. TF-001696, June / July, 2005.
Fonseca, D. S. B.; Cabrita, C. M. P.; Calado, M. R. A.: ''Linear Switched Reluctance Motor. A new Topology for Fault Tolerant Traction Applications''; IEEE International Electric Machines and Drives Conference, San Antonio, Texas, USA, pp. 823—827, March, 2005.
Fonseca, D. S. B.; Cardoso, A. J. M.; Cabrita, C. M. P.: ''O Motor de Relutância Variável Comutado e a Tolerância a Falhas''; Conferência de Engenharia - Inovação e Desenvolvimento, Covilhã, Portugal, pp. 349-355, November, 2001.
Cruz, D. F., ''Wireless Reflex Photoplethysmography Sensor. Hardware Project and Development'', Co-Supervisor: Cabrita, C. M. P., University of Beira Interior, Portugal, 2016.
Fonseca, D. S. B., ''A Linear Switched Reluctance Motor Drive for Light Electric traction (in Portuguese)'', Supervisor: Cabrita, C. M. P., Co-Supervisor: Calado, M. R. A., University of Beira Interior, Portugal, 2008.