Khaled Yahia
Khaled Yahia was born in Biskra, Algeria in 1980. He received the BSc, MSc and PhD degrees in electrical engineering from the University of Biskra, Algeria in 2002, 2005 and 2012, respectively. Currently, he is a Professor at the University of Biskra. His research interests are focused on condition monitoring of AC motors and energy efficiency in AC variable speed drives systems.

Doctorat en sciences, Fault diagnosis, Biskra, Biskra, Algeria, 2012.
Magister, Induction motor control , Biskra, Biskra, Algeria, 2005.
E. E. Diploma, Magnetism, Biskra, Biskra, Algeria, 2002.
Kerbouche, K.; Cardoso, A. J. M.; Yahia, K.; Mellit, A.: ''Mathematical Modelling and Simulation of a Directly Coupled Water Pumping System, Using a Photovoltaic-Fed Synchronous Reluctance Motor''; Lecture Notes in Electrical Engineering, Bekkay Hajji, Giuseppe M. Tina, Kamal Ghoumid, Abdelhamid Rabhi and Adel Mellit (Editor), 519, 431-437 pp., Springer Nature (978-981-13-1404-9), , Singapore, 2019.
Khoudiri, S.; Benchabane, F.; Yahia, K.: ''Nonlinear Control of a Grid Connected Hybrid Energetic Systems (HES) based on Photovoltaic-Fuel Cells Distributed Power Generation Systems''; Journal of Applied Engineering Science & Technology, Vol. 4, No. 1, pp. 29-36, May, 2018.
Benchabane, F.; Guettaf, A.; Yahia, K.; Sahraoui, M.: ''Experimental Investigation on Induction Motors Inter-Turns Short-Circuit and Broken Rotor Bars Faults Diagnosis through the Discrete Wavelet Transform''; 3D Printing and Additive Manufacturing, Vol. 135, No. 2, pp. 187-194, April, 2018.
Yahia, K.; Sahraoui, M.; Cardoso, A. J. M.; Ghoggal, A.: ''The Use of a Modified Prony's Method to Detect the Airgap-Eccentricity Occurrence in Induction Motors''; IEEE Transactions on Industry Applications, Vol. 52, No. 5, pp. 3869 - 387, September / October, 2016.
Sahraoui, M.; Cardoso, A. J. M.; Yahia, K.; Ghoggal, A.: ''The Use of the Modified Prony’s Method for Rotor Speed Estimation in Squirrel Cage Induction Motors''; IEEE Transactions on Industry Applications, Vol. 52, No. 3, pp. 2194-2202, May / June, 2016.
Matos, D. M. B.; Estima, J. O.; Yahia, K.; Cardoso, A. J. M.: ''Modeling and Implementation of MTPA Control Strategy for SynRM Variable Speed Drives''; International Review of Electrical Engineering, Vol. 9, No. 6, pp. 1103-1110, November / December, 2014.
Yahia, K.; Cardoso, A. J. M.; Ghoggal, A.; Zouzou, S. E.: ''Induction Motors Broken Rotor Bars Diagnosis Through the Discrete Wavelet Transform of the Instantaneous Reactive Power Signal under Time-varying Load Conditions''; Electric Power Components and Systems, Vol. 42, No. 7, pp. 682-692, April, 2014.
Yahia, K.; Cardoso, A. J. M.; Ghoggal, A.; Zouzou, S. E.: ''Induction Motors Airgap-Eccentricity Detection Through the Discrete Wavelet Transform of the Apparent Power Signal Under Non-Stationary Operating Conditions''; ISA Transactions, Vol. 53, No. 2, pp. 603–611, March, 2014.
Zouzou, S. E.; Sahraoui, M.; Yahia, K.: ''Induction motors broken rotor bars detection using MCSA and neural network: experimental research''; International Journal of System Assurance Engineering and Management, Vol. 2, No. 4, pp. 173-181, June, 2013.
Yahia, K.; Cardoso, A. J. M.; Zouzou, S. E.; Guedidi, S.: ''Broken Rotor Bars Diagnosis in an Induction Motor Fed from a Frequency Converter: Experimental Research''; International Journal of System Assurance Engineering and Management, Vol. 3, No. 1, pp. 40-46, March, 2012.
Mahmoudi, A.; Yahia, K.; Cardoso, A. J. M.; Sahraoui, M.; Mesai Ahmed, H.: ''Modeling of Synchronous Reluctance Generator for an Isolated Wind Turbine System''; International Symposium on Technology & Sustainable Industry Development, El Oued, Algeria, pp. 1-4, February, 2019.
Kerbouche, K.; Cardoso, A. J. M.; Yahia, K.; Mellit, A.: ''Mathematical Modelling and Simulation of a Directly Coupled Water Pumping System, Using a Photovoltaic-Fed Synchronous Reluctance Motor''; International Conference on Electronic Engineering and Renewable Energy, Saidia, Morocco, pp. 1-7, April, 2018.
Yahia, K.; Sahraoui, M.; Cardoso, A. J. M.; Ghoggal, A.: ''The Use of a Modified Prony's Method to Detect the Airgap-Eccentricity Occurrence in Induction Motors''; IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, Guarda, Portugal, pp. 441-447, September, 2015.
Sahraoui, M.; Cardoso, A. J. M.; Yahia, K.; Ghoggal, A.: ''The Use of the Modified Prony's Method for Rotor Speed Estimation in Squirrel Cage Induction Motors''; IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, Guarda, Portugal, pp. 455-460, September, 2015.
Yahia, K.; Estima, J. O.; Cardoso, A. J. M.: ''Modeling Synchronous Reluctance Motors Including Saturation, Iron Losses and Mechanical Losses''; International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Ischia, Italy, pp. 595-600, June, 2014.
Mahmoudi, A.; Yahia, K.; Cardoso, A. J. M.: ''Wind Turbine System Using Synchronous Reluctance Generator Self-Excited in Stand Alone Mode''; Conferência Científica e Tecnológica em Engenharia, Batna, Algeria, pp. , June, 2018.
Nacereddine, N., ''Diagnosis of Mixed Eccentricity Faults in a Three-Phase Asynchronous Motor using the Wavelet Transform'', Supervisor: Yahia, K., University of Biskra, Algeria, 2017.
Zakaria, E., ''Diagnosis of Rotor Bar Breaking Defects in the Three-Phase Asynchronous Machine using the Wavelet Transform'', Supervisor: Yahia, K., University of Biskra, Algeria, 2017.
Abdelhamid, K., ''Maximum Torque per Ampere Control of Synchronous Reluctance Motors'', Supervisor: Yahia, K., University of Biskra, Algeria, 2015.
Yahia, K., ''Contribution to the Diagnosis of Three-Phase Asynchronous Machine by Model Approach (in French)'', Co-Supervisor: Cardoso, A. J. M., Université Mohamed Khider, Algeria, 2012.